Tiếng Việt
Submersible motor 4 inch 1 phase for deep water well
These Submersible motor 4 inch 1 phase for deep water well are built for dependable operation in 4” diameter or larger water wells. Continuous rating in 86 °F (30 °C) water.
For further information, refer to Franklin Electric’s “Submersible Motors: Application, Installation, Maintenance Manual.”
| MODEL | PRODUCT | kW | HP | PHASE | VOLTS | HZ | SF | LEAD | THRUST |
| 4″ SUPER STAINLESS WATER WELL – 1 PHASE (1 LEAD INCLUDED) | |||||||||
| 2145559204S | 4″ 3W 1P | 0.37 | 1/2 | 1 | 220 | 50 | 1.0 | YES | 300 |
| 2145579204S | 4″ 3W 1P | 0.55 | 3/4 | 1 | 220 | 50 | 1.0 | YES | 300 |
| 2145589203S | 4″ 3W 1P | 0.75 | 1 | 1 | 220 | 50 | 1.0 | YES | 650 |
| 2243509203S | 4″ 3W 1P | 1.1 | 1.5 | 1 | 220 | 50 | 1.0 | YES | 650 |
| 2243519204S | 4″ 3W 1P | 1.5 | 2 | 1 | 220 | 50 | 1.0 | YES | 650 |
| 2243522604 | 4″ 3W 1P | 2.2 | 3 | 1 | 220 | 50 | 1.0 | YES | 900 |
| 2243528602 | 4″ 3W 1P | 2.2 | 3 | 1 | 220 | 50 | 1.0 | YES | 1500 |
| 2243538602 | 4″ 3W 1P | 3.7 | 5 | 1 | 220 | 50 | 1.0 | YES | 1500 |
Special Features:
- No flow inducer sleeve required in water up to 86 °F (30 °C) for motors through 2 hp.
- Two-wire motors are split-phase designs with integral starting components and on-winding thermal overload protection, and do not require a control box. They feature Franklin’s patented 2-wire BIAC starting switch which provides reverse impact torque to aid starting in adverse environments.
- Three-wire 60 Hz motors 1/3 – 1 hp use Franklin’s exclusive 3-wire QD (Quick-Disconnect) Control Box with the patented QD Relay. This relay provides the ultimate in operational life.
Basic Features:
- Corrosion-Resistant All Stainless Steel Exterior Construction
- Stainless Steel Splined Shaft
- Hermetically-Sealed Windings
- Anti-Track Self-Healing Resin System
- Water Lubrication
- Filter Check Valve
- Kingsbury-Type Thrust Bearing
- Pressure Equalizing Diaphragm
- Built-In Lightning Arrestors (all single-phase; 200 and 230 Volt three-phase)
- Removable “Water-Bloc” lead installed In North American 60 Hz water well motors. Consult factory for additional leads.
- UL 778 Recognized (North American Voltages)
- CSA Certifi ed
- ANSI/NSF 61 Certifi ed
- NEMA Mounting Dimensions
- Rotation: single-phase – CCW; three-phase electrically reversible
WARNING: Serious or fatal electrical shock or fi re hazard may result from failure to follow the instructions for proper installation and use which accompany this equipment. Do not use motor in swimming areas.
Be the first to review “Submersible motor 4 inch 1 phase for deep water well”
You must be logged in to post a review.
Reviews
There are no reviews yet.