Submersible pump controller

Submersible pump controller

Submersible pump controller designed for submersible pumps. Plug-in Control Module integrated is very easy setting. Includes complete electronic control for the Smart Pump Controller. Under/overload, ammeter, level/pressure control, alarms, pilot lights and LED display. Able to operate the pump in manual mode without the module.

12 months warranty according to Toscano warranty terms and conditions.

Technical specifications

Supply voltage: 230V~ I/III or 400V~ III (according to the model) -20% +30% – 50/60Hz
Pump current range: 1.5…18A – AC3
Overload setting: 1.6…19.2A (alarm trip in 7 seconds)
Underload setting: Off – 1.2…19A (alarm trip in 4 seconds)
Re-start time: Off – 3…120 minutes
External On/Off control: Dry contact or voltage from 6 to 250V~/V=
Terminal blocks wiring size: 10mm² (power) 4mm² (control)
Cable glands configuration: 1xM20 (main supply) / 1xM20 (motor) / 2xM16 (control)
Protections: Overload, underload, phase failure, over-voltage, pump wiring failure and wrong control wiring
Alarm contact: 5A – 250V~ / 5A – 30V=
Alarm contact activation: Overload, underload and phase failure
Recording information (PUMPCHECK): Module identification number, counter resets, pump running hours, pump starts, pump alarms and last alarm tripping current
Submersible pump controller Size/Weight/IP/Temperature: 240 (height) x 190 (width) x 110 (depth) / 1820g / IP66 / -10 +55ºC