Little Giant Magnetic Drive Pumps
Little Giant Magnet Drive Pumps feature a leakproof design that allows the pump to be used in a variety of applications where continuous and reliable operation is desired and when pumping corrosive liquids is necessary. Four series of pumps are offered: the MD, the MD-SC, MD-HC and MD-CK. The four groups offer increasing product features and chemical resistance. Little Giant MD pumps are in wide use in over 40 countries operating in applications ranging from circulating photographic solutions in film processing machines to moving harsh chemicals in electroplating equipment. The pumps are also found in OEM filtration equipment pumping de-ionized water and in many other fluid transfer processes.
No leakage
The magnetically coupled pump system replaces the shaft seal found in conventional pumps. The use of chemically resistant polymers for the materials of construction permits highly corrosive liquids to be pumped withoutut causing corrosion to the pumping chamber. Advanced materials used in the MD-HC and MD-CK Series offer the highest level of chemical resistance and provide excellent temperature and strength properties.
Operating principle
A pair of magnets, which form part of the impeller and motor shaft, drives the centrifugal pump. The magnet housing separates the pump chamber and motor shaft. This seal-less pump design eliminates conventional mechanical shaft seals because the motor shaft magnetically drives the impeller magnet by transmitting torque through the magnet housing. The combined coupling torque of the drive magnet and impeller magnet provides sufficient power to move a wide range of liquids including high-density liquids.
A variety of models from 11 L/min to 183 L/min
Little Giant MD Pumps can be selected for almost every application because there are over thirty different models available. The pumps are grouped in four product ranges from the 1-AA-MD with the lowest fl ow rate to the TE-7-MD-CK with the highest fl ow rate. Special purpose, high capacity models, as well as economical models, offer a wide selection. High-density acids such as concentrated sulfuric acid can be pumped by the larger models withoutut overload by changing impeller sizes. Each pump assembly consists of only a few parts. Therefore maintenance, disassembly and inspection are very easy to perform.
Pump selection guide
Several factors are involved in the proper selection of a magnetic drive pump. Caution should be exercised in matching the wetted pump parts to the chemicals and concentrations in the solution to be pumped. For the chemical resistance of the wetted pump parts, refer to Little Giant Pump Company Chemical Resistance Chart (Form #995516).
Factors that must be taken into consideration in choosing a pump
- Pump characteristics: Capacity (liters per minute or hour), discharge lift (in meters), suction lift (if any), outlet pressure (bar or Kg/cm2), inlet and outlet pipe size and horizontal pipe length and any noise limitations.
- Fluid characteristics: Chemical composition, temperature and solids content in suspension (nature,
size and abrasive quality) and density or approximate concentration percentage (weight per liter) and
viscosity at the liquid’s normal pumping temperature. - Other characteristics: Motor electrical requirements (Volts, Hertz, Phase), space limitations and normal
ambient air temperature of the area in which the pump and motor will be installed.
Little Giant Magnetic Drive Pumps Features:
- Leakproof, seal-less magnetic drive
- No maintenance due to seal wear
- No seal friction to reduce motor horsepower
- Only chemical resistant materials are in contact with fl uids
- Dynamically balanced drive magnet for long motor bearing life
- Magnetic coupling design acts as a clutch to eliminate motor burnout and overloading under adverse conditions
- Pumping heads are easily rotated, cleaned or serviced with no special tool requirements
- Spindle shaft is supported at both ends to prevent impeller damage during start-up and stop of pump
- Magnet housing acts as an insulator to prevent motor heat from being transferred to the fl uid being pumped
- Wide selections of materials for the pump wetted components to provide the best chemical resistance
- All threaded intake and discharge ports are USA (American) standard taper pipe threads (NPT). PTFE tape is provided with PPS pumping head models.
- The MD-HC Series models have “run-dry” capability
- All motors feature thermal overload protection
- All motors are rated for continuous duty
Four series with increasing chemical resistance
Little Giant Magnetic Drive Pumps MD Series
Designed for pumping mild solutions such as those found in film processing and most neutral chemicals with temperatures up to 66 °C. Materials of construction include glass-filled polypropylene, titanium, nitrile and a barium-ferrite magnet.
MD-SC Series
Designed to pump mild to strong acids found in electroplating applications with temperatures up to 66 °C. Materials of construction include glass-fi lled polypropylene, ceramic and nitrile.
Little Giant Magnetic Drive Pumps MD-HC Series
Designed to pump strong acids and alkaline solutions including sulfuric, nitric and hydrochloric acid with temperatures up to 93 °C. In addition, the HC series offers “Run Dry” protection. Materials of construction
include glass-filled polyphenylene sulfide (PPS), ceramic, Fluoroelastomer (FKM) and pure carbon.
MD-CK Series
Designed to pump highly corrosive acids and halogenated hydrocarbons such as hydrofl uoric acid and ultrapure water solutions. Maximum fluid temperature is 93 ° C. Materials of construction include carbon-filled P VDF, ceramic, Fluoroelastomer (FKM) and carbon PTFE. Little Giant’s comprehensive line of magnetic drive pumps is designed for circulation of acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other special fluids; for use in environments such as hospitals, chemical companies, photo labs, dry cleaning plants, car washes, machine shops, laboratories, manufacturing plants, print shops and wineries.
Little Giant Magnetic Drive Pumps data:
| Item | Name of Product | Item # | Model | Voltage | Phase | Hz | Amps | Watts | (HP) | (LPM) |
| MD Series Pumps | ||||||||||
| 1 | Magnetic drive pumps MD Series | 588002 | 1-AA-MD | 230 | 1 | 50/60 | 0.14 | 15 | 1/200 | 9 |
| 2 | 589012 | 1-MD | 230 | 1 | 50/60 | 0.66 | 90 | 1/70 | 13.2 | |
| 3 | 580012 | 2-MD | 230 | 1 | 50/60 | 0.65 | 105 | 1/30 | 28 | |
| 4 | 581012 | TE-3-MD | 230 | 1 | 50/60 | 1.10 | 135 | 1/20 | 31 | |
| 5 | 582012 | 4-MD | 230 | 1 | 50/60 | 1/12 | 43.5 | |||
| 6 | 583012 | 5-MD | 230 | 1 | 50/60 | 0.90 | 185 | 1/8 | 52 | |
| MD-SC Series Pumps | ||||||||||
| 7 | Magnetic drive pumps MD-SC Series | 589211 | 1.5-MDI-SC | 230 | 1 | 50/60 | 0.70 | 95 | 1/35 | 19 |
| 8 | 589237 | PE-1.5-MDI-SC | 230 | 1 | 50 | 0.43 | 50 | 1/35 | 19 | |
| 9 | 580513 | 2-MD-SC | 230 | 1 | 50/60 | 0.65 | 105 | 1/30 | 28 | |
| 10 | 581576 | 3-MD-SC | 230 | 1 | 50 | 0.82 | 120 | 1/12 | 39 | |
| 11 | 581513 | 3-MD-SC | 230 | 1 | 50 | 0.82 | 120 | 1/12 | 39 | |
| 12 | 581538 | TE-3-MD-SC | 230 | 1 | 50/60 | 0.89 | 120 | 1/20 | 33 | |
| 13 | 581517 | 3-MDQX-SC | 230 | 1 | 50 | 0.31 | 70 | 1/15 | 58 | |
| 14 | 582514 | TE-4-MD-SC | 230 | 1 | 50/60 | 0.50 | 120 | 1/10 | 49 | |
| 15 | 582515 | TE-4-MDX-SC | 230 | 1 | 50/60 | 0.50 | 120 | 1/10 | 75.7 | |
| 16 | 583513 | 5-MD-SC | 230 | 1 | 50/60 | 1 | 200 | 1/8 | 60 | |
| 17 | 584538 | TE-5-MD-SC | 230 | 1 | 50/60 | 1.3 | 220 | 1/8 | 61 | |
| 18 | 585504 | TE-5.5-MD-SC | 230 | 1 | 50/60 | 2.8 | 380 | 1/3 | 102 | |
| 19 | 585514 | TE-5.5-MDQ-SC | 230 | 1 | 50/60 | 2.2 | 300 | 1/2 | 109 | |
| 20 | 586504 | TE-6-MD-SC | 230 | 1 | 50/60 | 11.6 | 640 | 1/2 | 125 | |
| 21 | 587400 | TE-7-MD-SC | 230 | 1 | 50/60 | 5.2 | 700 | 3/4 | 159 | |
| MD-HC Series Pumps | ||||||||||
| 22 | Magnetic drive pumps MD-HC | 580613 | 2-MD-HC | 230 | 1 | 50/60 | 0.65 | 105 | 1/30 | 28 |
| 23 | 581613 | 3-MD-HC | 230 | 1 | 50/60 | 1/12 | ||||
| 24 | 581614 | TE-3-MD-HC | 230 | 1 | 50/60 | 1.10 | 135 | 1/20 | 35 | |
| 25 | 582614 | TE-4-MD-HC | 230 | 1 | 50/60 | 0.5 | 120 | 1/10 | 49 | |
| 26 | 583613 | 5-MD-HC | 230 | 1 | 50/60 | 0.9 | 194 | 1/8 | 60 | |
| 27 | 584604 | TE-5-MD-HC | 230 | 1 | 50/60 | 1.3 | 220 | 1/8 | 61 | |
| 28 | 585604 | TE-5.5-MD-HC | 230 | 1 | 50/60 | 2.8 | 340 | 1/3 | 102 | |
| 29 | 586604 | TE-6-MD-HC | 230 | 1 | 50/60 | 5.8 | 640 | 1/2 | 125 | |
| 30 | 587010 | TE-7-MD-HC | 230 | 1 | 50/60 | 5.2 | 700 | 3/4 | 159 | |
| 31 | 587040 | TE-7-MD-HC | 460 | 3 | 50/60 | 1.5 | 680 | 3/4 | 159 | |
| TE-MD-CK Series Pumps | ||||||||||
| 32 | Magnetic drive pumps TE-MD-CK Series | 585600 | TE-5.5-MD-CK << | 230 | 1 | 50/60 | 2.8 | 340 | 1/3 | 102 |
| 33 | 586600 | TE-6-MD-CK | 230 | 1 | 50/60 | 5.8 | 640 | 1/2 | 125 | |
| 34 | 586610 | TE-6-MD-CK << | 230 | 1 | 50/60 | 5.8 | 640 | 1/2 | 125 | |
| 35 | 587600 | TE-7-MD-CK | 230 | 1 | 50/60 | 5.2 | 700 | 3/4 | 159 | |
| 36 | 587603 | TE-7-MD-CK | 460 | 3 | 50/60 | 1.5 | 680 | 3/4 | 159 | |

Tiếng Việt
Reviews
There are no reviews yet.